What Are the Pros and Cons of Augmented Category 6 (Cat6a) Cabling?

Introduced in 1997, Category6 (or Cat6) networking cable offered significant improvements over its predecessor, the Cat5ecable. It offers data transfer speeds up to twice as fast as a Cat5e and with less attenuation and EMI problems. It is also backward compatible, so even if your equipment is only capable of 10/100 speeds, you can replace all your Cat5e cable with Cat6. You won’t get the benefits of Cat6, but you’ll still be in business. 

2008 brought an improvement to Cat6, with Cat6a, or Augmented Category 6. This standard is defined at frequencies up to 500 MHz which is twice that of its predecessor, the Cat6.

The purpose of Cat6a is to support 10GbE networking, and it is capable of supporting this speed for up to 100 meters. Speed is really the only benefit of Cat6a over Cat6 and Cat5e. (Although a tenfold increase in speed is a huge improvement!)

There are several drawbacks to Cat6a cables including:

Price

Cat6a is a more expensive product, running generally anywhere between 30 to 50 percent more than Cat5e or Cat6. In a large scale renovation, it may be a reasonable choice to go with Cat6a, particularly for large businesses that deal with huge amounts of data and those that would benefit from the enhanced speeds.

Equipment

With enhanced capabilities in cabling comes the necessity to upgrade equipment, thus adding to the overall cost of the upgrade. You could use Cat6a cables, but you’ll never achieve 10GbE with the same old 10/100 or 10/100/1,000 network cards or switches and, desktop network cards with that kind of support are still rather expensive.

Sure the cables will transfer your data, but the data is only going to travel as fast as your slowest piece of equipment. It’s like buying a moped (do they still make mopeds??) and only using the pedals.

Cable Size

Perhaps the biggest drawback of the Category 6a cable is it’s thicker than Cat6, by almost 100 percent. It’s nearly the size of a Coaxial cable. In the case of new construction, or extensive renovation, this isn’t such a big deal, as old cable trays can be replaced or areas where thinner cables were run can be widened. However, if you’re looking to replace old wiring with Cat6a, you may run into trouble due to the cables’ width. 

The cable size also impacts other aspects. The weight of the cable can be a problem when it comes to installing or hanging runs. When cables hang, they stretch, which will degrade the signal. This may require upgrading cable raceways or hanging racks. If this solution is cost prohibitive, the tendency is to use more zip ties. However, this cable is also much more sensitive to damage. Over-tightened zip ties will cause signal reflections, causing the signal to degrade more so in the Cat6a than in earlier standards.

Also, due to size and width, the Cat6a cable has a larger minimum bend radius. Any network cable’s performance will degrade if runs take too sharp a turn. The Cat6a cable is affected even more acutely by tight turns than its predecessor.

Should I Upgrade to Cat6a?

The most important question to ask yourself when considering changing to Cat6a is, “Am I going to need to support 10GbE?” If you run a business with a few hundred employees, then maybe not. A datacenter or an ISP though, may benefit from upgrading their backbone to something capable of these speeds.

At CZ Labs we are always on-hand to answer your questions via live chat or call us at 800-423-2322.

We carry a large lineup of Cat5e and Cat 6 products at wholesale bulk discount pricing. We cater to businesses and IT companies that need bulk quantities. Please do visit our online store for more information and to learn more about our products.

We also invite you to like us on Facebook and add us to your circles on Google+.

When Should I Use a Surge Protector?

Surge protectors are so common these days that the term is almost synonymous with “power strip.” A power strip is simply an extension of the outlet on your wall. It is (usually) a short extension cord with multiple outlets built in, allowing us to expand our power outlets. A basic power strip offers no protection against power surges or spikes.

In part one of our blog post on surge protectors, we discussed how these units are a power strip with built in protection against electrical spikes and surges. They allow us to expand our power outlet availability and protect our electronic devices from getting fried.

“When should I use a power strip” is a matter of personal opinion. The better question to ask would be: “What devices do I own that I’d like to protect from power spikes and surges?” Perhaps the only reason to opt for a simple power strip over a surge protector, is money. A simple 6 outlet power strip is usually under $10, whereas a surge protector is generally somewhere between $10 and $20. Also, even one strong power surge, and your surge protector is likely not much protection anymore, which means you’re going to need a new one—hence the importance of buying a quality surge protector.

You probably don’t need to plug your lamp into a surge protector because the worst thing that’s likely to happen to your lamp due to a voltage increase, is a burnt out bulb. There are even those who contend their coffee maker is worth protecting, but to be honest, you may want to think twice about having that many outlets available on the counter next to a 10 or 12 cup pot of water.

Electronics you should have a surge protector for include:

Computers

Your computers and their peripherals (i.e. monitor, speakers, keyboards, web cams, etc.) are filled with electric-sensitive components. Electrical surges are commonplace in the computer world and can cause a host of problems, many of which are difficult to diagnose leading to lost time and money.

Consider what would happen if your computer (or any other components) were damaged by a power surge. Computers are expensive to replace of course, but many times they are also filled with irreplaceable information, pictures, documents, etc. The cost to protect your computer devices is a necessary must-do.

TVs and Other Home Entertainment Components

Most of these devices are equipped to handle small spikes, but with added protection, they will last longer. These electrical devices, like your computers, are not cheap to replace.

With every new design home entertainment products become more accurate and produce higher definition, so the internal components become more and more sensitive to electricity. This is why power surges cause damage far more often now than they did years ago.

Cell Phones & Similar Hand-Held Electronics

Again, these items are costly to replace and sometimes contain irreplaceable data.

Another consideration is that power can be pushed over more than one power cable. Power spikes can be caused by lightning hitting phone cables or cable TV lines, so when choosing a surge protector consider one that has jacks for these cables as well.

CZ Labs offers a large inventory of quality surge protectors at wholesale, bulk pricing to help you protect all of your electronic devices.

As always, we hope you’ll like us on Facebook, follow us on Twitter and check out our Pinterest Boards.

If you have questions about surge protectors or any of the other items we sell, please feel free to contact us at 800-423-2322 or visit our website and take advantage of our live chat support.

How Do Surge Protectors Work - Part One

The power that runs through our homes and offices largely goes unnoticed. We plug things in all the time and hardly ever give a thought to the energy that delivers the power we need.

Power is essential at the workplace and in our homes and as time goes by and we obtain even more electrical devices, we find ourselves plugging things in more often and in greater volume. Eventually, we run out of plugs, and find we need more outlets. The easiest way to get the power we need is with a power strip—a simple row of outlets on one strip that is plugged into one electrical outlet.

We all endure power outages and when power goes out and we’re unable to use our beloved devices, it can be aggravating but most of us have come to view it as something that just happens.

However, what happens if power goes in the other direction—power overload? If there is too much power forced through the lines, as in a power spike, what can we do to protect our already plugged-in devices?

The common level of voltage in a home or office space is 120V. Problems start to happen when the voltage rises above 120. When it rises for two nanoseconds or less, the event is called a power spike. Just three nanoseconds or more is called a power surge.

The best analogy for understanding this problem is to think of your electrical wire as a garden hose. To force water out of the nozzle, you turn up the pressure on the other end. This is similar to increasing electrical voltage on one end of a wire. The energy is essentially pushed through the wire just like water is pushed through a hose.

Increasing the water pressure too much will eventually cause the hose to burst. Likewise, if the electrical voltage is increased higher than it should be—electrical components will heat up too much and without proper protection, excessive power bursts cause our devices to fail and can even cause irreparable damage.

Enter the Surge Protector

Power surges and spikes are the most common cause of electronic device failures. This frustrates the end user, especially because the situation could have easily been prevented by a surge protector.

Within the surge protector, is a component called the MOV (Metal Oxide Varistor). This is a piece of metal oxide joined on either end by semiconductors; one end to the hot wire or power feed and the other to the ground. Under normal circumstances, the MOV offers too much resistance for electricity to bother with so our devices continue to function properly.

When the voltage increases beyond its proper levels such as in a power surge or spike, the MOV changes how it operates. The MOV will channel the excess voltage back out of the power strip through the ground wire sparing our electronics. Surge protectors also give us the time we need to turn off devices if severe power bursts are reported.

In the simplest terms, this is how surge protectors work and it’s that MOV that protects our devices. Still, many of us are unsure of when to use surge protectors and on what devices.

CZ Labs hopes you’ll bookmark our blog because in part two of our post, we’ll explain when and how to use surge protectors—so check back on tomorrow, Wednesday, July 3, 2013 to learn more!

We sell many surge protectors at bulk and wholesale pricing for all your home and office needs. 

We also hope you’ll like us on Facebook, follow us on Twitter and add us to your Google+ circles as we continue to bring you informative posts on cables, connectors—and surge protectors.